Skip to Content

How to Make a Tire Swing

Learn how to make a tire swing, and the kids will be entertained all summer long!

How to Make a Tire Swing
I don’t know about you, but when I think about summer, my first thoughts are of fun outdoor activities for my boys.

And my second thoughts?

How to keep the cost down on those outdoor activities!

Well, my friends, it doesn’t get much more fun and inexpensive than a tire swing for your kids!

Let me show you how to make one.

It may be even simpler than you thought!

DIY tire swing supplies
The main supplies necessary for a good tire swing are

U-bolts

Steel chain

An old tire

You will also need a

Chain S-hook

Carabiner

A length of nylon cord

For this project you will need 3 U-bolts.

You can find them at your local hardware store, and they each come with a plate and 2 hex nuts.

You will also need some steel chain.

It does not need to be heavy duty, simply what you would use on a swing set.

For measuring purposes, figure out the length you would need to attach the tire to a tree then multiply by three.

Divide the chain into 3 even sections.

 

Is it time for new tires for your vehicle?

You might want to hold on to one of them!

Or you can probably snag one for free from a neighbor, family member, or your local dump.

Scrub the tire you use very well with soapy water to remove as much dirt as possible.

Once clean and dry, spray the tire with a clear sealant.

Drill a set of holes in the outer wall of the tire that a U-bolt would fit through.

Repeat 1/3 of the way around the tire, then once more another 1/3 of the way around the tire.

DIY tire swing supplies

Put a U-bolt through the end of one section of chain then insert the U-bolt through one of the sets of holes you drilled into the tire.

On the inside of the tire, place the plate that came with the U-bolt on the U-bolt ends sticking through the tire.

Screw on the hex nuts.

Repeat this process with the other 2 sets of holes in the tire and the rest of the chain and the other two U-bolts.

DIY tire swing supplies
Now we are ready to hang the tire from a tree!

Find a nice thick branch that will hold approximately 150 pounds.

Its also nice if you can at least reach the branch with a regular ladder.

DIY tire swing supplies
Gather the 3 lengths of chain from the tire and hook them to a chain S-hook so that the tire sits level.

Hook the other end of the S-hook to a carabiner.

We are going to use nylon cord to attach the entire unit to the tree. Why?

The nylon cord will not eat into the tree the way chain would.

Knot one end of the nylon cord to the carabiner and the other end to the tree.

Test out the tire swing out before letting your little ones on it!

How to Make a Tire Swing
Now we’re really ready for some fun!

My boys love their tire swing and ride it daily if it isn’t raining.

It’s the first thing they want to do when they get home from school!

 

siggie
>> See where I party! <<

 

This post was originally shared July, 2013.

Click here to cancel reply.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

moretha

Saturday 25th of June 2022

This reminds me completely of our backyard tree swing from my childhood. Since I have kids of my own, I make it a point to get them their own tree swings. The design I saw on treeswingstore.com is what most appeals to me, and I can't wait to get my hands on one.

Contractorfinder

Thursday 1st of July 2021

Thanks for sharing this idea. You reminded me of my childhood and I read your article with nostalgia, which made me happy again. I remember how my parents built a similar swing for my sister and me and it was the most wonderful outdoor entertainment. We could spend hours under this tree and ride. In addition, in modern realities, it is also a saving of resources, since you use with benefit what is no longer suitable for its intended purpose. And this is great! After all, in this way we are also trying to save our ecology, especially when you consider that instead of this there could be a swing made of plastic.

Donna @ Modern on Monticello

Monday 29th of July 2019

You are creating some fun memories for your kids. Great tutorial! Thanks for sharing at #HomeMattersParty

Sarah @ The DIY Mommy

Saturday 27th of July 2019

I have always loved the idea of having a tire swing! Great post!

Anita Holland

Sunday 21st of July 2019

What a great project, I remember having lots of fun on one as a kid. Well done.

This site uses Akismet to reduce spam. Learn how your comment data is processed.