Skip to Content

How to Install a Rain Barrel

how to install a rain barrel tutorial
One of the features I’m most excited about with my new patio is the installation of a rain barrel!

It feels great to be recycling rainwater and putting less of a strain on our own water bill.

But also, because of the location of the patio, its much easier to water the plants there with a watering can than dragging a hose over.

If you’ve ever considered using a rain barrel, I’m here to show you how simple the installation can be!

patio makeover before
This is the “before” photo of the exterior of my potting shed. Sad, right? Well, it was the end of winter when I took the picture which is usually a pretty sad time for anything outdoors.

But do you see that sad barrel sitting off to the right? That’s my rain barrel. I won’t even embarrass myself and tell you how long ago I purchased it and left it sitting unattended in the yard. Let’s just say installing it was long overdue.

I purchased my rain barrel from Wayfair.com but there is a similar one here (affiliate link). You can find rain barrels at most home improvement stores. If you can your hands on regular barrel, you can convert it to a rain barrel with a rain barrel kit (affiliate link).

hidden rain barrel
Although I purposely selected a relatively nondescript rain barrel, I did not want it to be super noticeable when deciding where to place it. It also needed to be placed somewhere where it would be useful and easy to get the water inside to the plants that needed it.

When planning the dimensions of the brick patio I allotted a small bricked space around the side of the potting shed. This is where I planned to put the rain barrel. Mostly out of sight, but right next to all of the flowers that would need its water.

diy rain barrel
The main problem with the location I wanted for the rain barrel was that it was on the wrong side of potting shed from the gutter. The gutter would need to be diverted to the side of the potting shed.

rain barrel gutter
To divert the gutter to the top of the rain barrel we used a vinyl Flex-A-Spout found at Lowe’s. It was the perfect solution to transfer the water in the gutter to the rain barrel.

We used a hacksaw to cut off the metal gutter ~7 ft from the ground. The spout fit over the end of the gutter, and we secured it with 1/8″ rivets. The rain barrel comes with a screen where the water enters to prevent a lot of gunk from getting into the water and clogging the system up. You can secure the end of the flex spout on top of the screen or, as we did, cut a hole in the screen and have it keep the end of the spout in place. We did this because we already have gutter guards on the gutters so it is mainly just water running through the spout minus all of the gunk that can get in them.

rain barrel stand
Rain barrels come with the spout located low on the barrels. Obviously this is so you can get most of the water back out of the barrel. But this also creates a problem of getting your watering can or bucket under spout.

To solve this problem we simply constructed a platform for the rain barrel to sit on. We made it out of 4×4 pre-treated lumber we had leftover from building our fence (so, in other words, no extra cost to us!).

rain barrel
By stacking 3-high, the spout is now ~10-11 inches off the ground. This is plenty of space to fit most watering cans under.

hot to install rain barrel
Believe it or not, I actually look forward to the rainy days now that the rain barrel is installed!

That’s just that much more FREE water I can use to water my plants and gardens.

Now that you see how easy installing a rain barrel can be, I do hope you’ll give it a try!

Rain barrels can be an investment, but you’ll make your money back over time by saving on your water bill.

siggie
>> See where I party! <<

Be sure to check out:

potting shed makeover paint exterior light old drawer flower wood table top window flower instant makeover paint door build brick patio diy shutters

Click here to cancel reply.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Calypso in the Country

Thursday 11th of July 2019

What a great idea and it came out so nice! Thanks for linking up to Best of the Weekend! Your post was one of my features this week. I will be pinning and adding to Instagram stories this weekend. Stop by my blog tomorrow to see your feature and to link up any recent projects. Enjoy your weekend! Shelley

Anita Holland

Thursday 11th of July 2019

Never seen one of these before, thought it was a wine barrel. Great project

Kippi

Tuesday 2nd of July 2019

I like that you put the rain-barrel on platform so you can easily fill your watering can. Happy summer, Kippi

Jean | Delightful Repast

Tuesday 2nd of July 2019

Michele, this is something I've intended to do for many years, so I had to chuckle when I read how long you'd been procrastinating on the installation! :-) Pinned for future (near future, I hope!) reference. #MakeItPrettyMonday

theartinpartyplanning

Friday 12th of June 2015

Genius! I pinned this as I plan to make one for my gardens!

This site uses Akismet to reduce spam. Learn how your comment data is processed.