Skip to Content

Cabochon Chandelier Necklace

 This project is part of a sponsored campaign with Plaid and The Blueprint Social. All opinions in this post are my own.
 
cabochon chandelier necklace
I am a big fan of making my own jewelry. There is something liberating about designing a unique piece that no one else owns. Not to mention the fact that you can make your jewelry match a particular outfit to a T.
Recently, a new product has come to market to make creating unique pieces of jewelry even simpler!
Martha Stewart Jewelry is a complete line of jewelry making supplies found exclusively at your local Michael’s store.
martha stewart crafts jewelry
I recently received a box full of items from the new Martha Stewart Crafts Jewelry line.
There are so many pieces to work with! And some really unique items that you won’t find anywhere else.
We’re talking chain, beads, charms, findings, pliers, enamels, clays, rhinestones, cabochons, molds, glazes, brushes, and more!
I have starred the pieces I will be using to make my cabochon chandelier necklace including:

martha stewart crafts jewelry custom mold
I was immediately drawn to the custom mold kit. Imagine making your own molds out of anything!!
As you can see, I got a little excited with it and made several molds to test it out.
There was a slight learning curve, but by my 3rd attempt I had things down pat.
The custom mold kit comes with a silicone base and a catalyst that you mix together according to the directions. You can measure and mix them directly in the measuring cup that comes with the kit. Mix the two together thoroughly with one of the wooden sticks that comes in the kit.
You have to allow the mold to solidify very slightly before you add your item to be molded!
Otherwise your template item will sink to the bottom. The trick I discovered to know when to add your item to the mold is this:
The silicone and catalyst will bubble slightly once you are done mixing. Once the bubbles stop popping on the surface of the mold you can safely add your item to the mold and it will not sink.
 
Allow your item to sit in the mold for at least 24 hours before removing it. Then you are ready to add clay to the mold and start creating your own cabochons!
custom clay mold
My favorite mold was of this vintage-style button. The mold picked up every little detail in the button!
The black button to the left is the original. The white piece to the right is my new clay cabochon.
custom clay necklace
To create the necklace, I put some of the rhinestones into the stone settings. I used both the pronged settings and the open settings. For the open setting you will need to use the jewelry glue to adhere the rhinestones to the settings.
To soften the filigree settings, I put 2 coats of ivory glaze on them using a glazing brush.
To my new cabochon buttons, I added 2 coats of sea green glaze followed by a single light coat of ivory glaze.
The center of the cabochon buttons was the perfect place to add a rhinestone so I glued those down with the jewelry glue then adhered the buttons to the filigree settings with the jewelry glue.
Allow all of this to dry overnight.
rhinestone clay necklace
Now its time to put everything together!
Use jump rings to connect the 3 filigree settings together.
Use more jump rings to add the rhinestones to the filigree settings. This gives it the “chandelier” look.
If you desire to do so, add in a couple of rhinestones to the chain on the necklace.
cabochon+necklace

And just like that we have a completely unique piece of jewelry!
What do you think? Would you give this a try?
What would you make a mold of?
 
You can keep up with Plaid Crafts on
Facebook | Twitter | Pinterest
Be sure to check out these other amazing jewelry pieces!

Disclosure: I wrote this post as part of a sponsored campaign with Plaid and The Blueprint Social. All opinions in this post are my own.
 
 

 

siggie

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Pearl Blay

Wednesday 7th of August 2013

I've been wanting to make my own molds for ages! Thanks for the tute!

Carol TheAnswerIsChocolate

Thursday 6th of June 2013

Wanted to let you know I'm featuring this when my link party goes up tonight!

Randi~Dukes and Duchesses

Tuesday 4th of June 2013

So pretty! Those molds are really neat ... so many possibilities!

Heather SettingforFour

Sunday 2nd of June 2013

Gorgeous - I love the colors!! How cool to use molds!

Amanda @ Serenity Now

Sunday 2nd of June 2013

Love that you showed how the molds work...I haven't tried mine yet! Your necklace came out so nicely!!

This site uses Akismet to reduce spam. Learn how your comment data is processed.